Tayfun from TurkeyVeikong solar pump inverter is really in very good quality and we also prepared some promotional products for exhibition. We are going to make new orders soon. Last year there was only one local agent and this year, there are more than 8. Some of them only sell Veikong!
Cristian from ChileIt’s very good! LCD options make it much easier to use. That’s the strong point, easy of use. And robust. Great PC software.
Brahim assad from SyriaVEIKONG VFD500 output frequency is stable when the others are fluctuating. Also output current is less than others, that’s why output frequency is higher too which can save more energy.
|Place of Origin
|Minimum Order Quantity
|the power less than 45kw use Carton, starting from 45kw use Wooden case
|3 days, depend on the order quantity
|L/C, T/T, Western Union
|15000pcs per Month
|10hp 7.5kw Inverter
|Max InputDC Voltage
|450vdc Or 800vdc
|Under Voltage Protection,Input Polarity/UVP/OVP/OSP/OLP/OTP,overload Protection,short Circuit
MPPT 7.5 Kw Solar Inverter,
450vdc Solar Submersible Pump Controller,
VFD 7.5 Kw Solar Inverter
10HP 7.5kw MPPT VFD solar inverter solar pump power controller
1. Wake up and sleep function parameters:
|Light detection threshold
|If the output frequency is lower than this value and exceeds P47.06, it will be reported to Sleep and stop
|Light detection time
|See P47.05 for explanation.
|Light weak wake up time
|After the sleep fault is reported, if the time when Vdc is higher than the undervoltage point is greater than the set value, the fault state is exited and the operation continues.
2. Dry runing protection function parameters:
|Dry run/Unload protection option
0: No offload detection is performed;
1: Enable dry run detection
|Dry run/Unload detection level
0.0 to 200.0%
The percentage of motor rated current.
|Dry run Unload detection time
|Unload detection offset frequency
|Reset time of dry run protection
|Dry run detection mode
3000:Continue to run
3. Water full protection function parameters:
|Full water level detection channel
Note: DI terminal function code 60-full water level detection is same with Analogue detection, and the detection time and recovery time are the same.
|Full water level detection value
|Full water level detection time
When DI-60 is valid or meets the analog detection channel greater than P47.19 and maintains P47.20 time, the system reports A.Full and stops.
|Full water recovery time
When the condition described in P47.20 does not meet full water level detection requirement ,it will be returned to normal state after delay
Support optional LCD keypad
Support optional GPRS Module
VEIKONG Solar pump special parameter User mode fast quick start